QS Small Submersible Pump

QS Small Submersible Pump Product Overview:

QS series submersible pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. The motor and water pump assembly into one, with simple structure, convenient installation remove, cover a small area, easy to use and maintain, safe and reliable operation, no water polluted, etc.

QS Small Submersible Pump Working Conditions:

The power: three-phase ac power frequency 50 Hz, voltage 380 v (allow deviation + 5%, 10%).Pumps should be safely operated, depth diving in the water not less than 0.5 meters
The water: Generally, water of no corrosion , sand content no more than 0.02%, PH 6.5 to 8.5. The temperature of the extract water is not higher than 30 ℃.
Before using, the motor lumen must be filled with the clean water, it is strictly forbidden running without water.

QS Small Submersible Pump Characteristics:

(1). motors and pumps assembled into one, 
(2). simple structure, 
(3). easy installation and removal , small area, 
(4). simple using and maintenance , safe and reliable operation, 
(5). no pollution to water, etc.

Q Extra Big Submersible Pump

Q Extra Big Submersible Pump Contain:

150QJ,175QJ,200QJ,250QJ,300QJ,400QJ,QJR,QY,QD,QS etc series pump

Q Extra Big Submersible Pump Overview :

widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities.

Q Extra Big Submersible Pump using condition:

(1). 380V voltage deviation is no more than ±5%,frequency is 50HZ, three -phase power deviation is no more than ±1%.
(2). Motor cavity must be filled with water.
(3). The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
(4). The distance from the motor bottom to well bottom must be more than 3m.
(5). Water temperature should be no more than 20°C.
(6). Sand content of the water ( by mass) should be no more than 0.01%.
(7). PH value of water 6.5-8.5.
(8). Hydrogen sulfide content of the water should be no more than 1.5mg/L.
(9). Chloride ion content of the water should be no more than 400mg/L.
(10). Water yield of water source should ensure the requirements of pump continuous working.

Q Extra Big Submersible Pump Material:

Impeller: Cast iron HT200,or stainless steel
Pump bowl: Cast iron HT200,or stainless steel,such as ss304, ss316, ss316L
Pump shaft : Cold-drawn steel with chrome plating,or stainless steel ss304 ss316 and ss316L
Motor Seal: Rubber O-ring seal,mechanical seal
Motor regulating sleeve: rubber

Q Extra Big Submersible Pump Characteristics:

1. Motors and pumps assembled into one.
2. Simple structure.
3. Easy installation and removal, small area.
4. Simple using and maintenance.
5. Safe and reliable operation, no pollution to water, etc.

QSP Fountain Submersible Pump

QSP Fountain Submersible Pump widely used

1.agriculture irrigation, sprinkler irrigation, well water lifting. 2.the water supply, drain system of industrial and civil building. 3.Foundation, and another Landscape engineering, for example: The waterfall.The water curtain movie

QSP Fountain Submersible Pump using condition:

1. Power source : frequency is 50HZ , voltage 380V ( allowable deviation of ±5%) three-phase AC power.The pump should be completely immersed into water to run , and the diving depth is no more than 5m
2. Water source: general non-corrosive water, sand content less than 0.02%. PH value : 6.5-8.5; water temperature no more than +40°C.

QSP Fountain Submersible Pump Characteristics:

1.motors and pumps assembled into one,
2.simple structure,
3.easy installation and removal , small area,
4.simple using and maintenance , safe and reliable operation,
5.no pollution to water, etc.

QJG High Lift Submersible Pump

QJG High Lift Submersible Pump Product overview :

QJG High Lift Submersible Pump widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities.

QJG High Lift Submersible Pump Using condition:

(1). 380V voltage deviation is no more than ±5%,frequency is 50HZ, three -phase power deviation is no more than ±1%.
(2). Motor cavity must be filled with water.
(3). The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
(4). The distance from the motor bottom to well bottom must be more than 3m.
(5). Water temperature should be no more than 20°C.
(6). Sand content of the water ( by mass) should be no more than 0.01%.
(7). PH value of water 6.5-8.5.
(8). Hydrogen sulfide content of the water should be no more than 1.5mg/L.
(9). Chloride ion content of the water should be no more than 400mg/L.
(10). Water yield of water source should ensure the requirements of pump continuous working.

QK Mine Submersible Pump

QK Submersible Pump Application:

QK series submersible pump is widely suitable for the extraction of groundwater from deep well, mine, can be used for gold, silver, iron ore, coal mine rescue, site drainage

QK Submersible Pump using condition:

380V voltage deviation is no more than ±5%,frequency is 50HZ, three -phase power deviation is no more than ±1%.
Motor cavity must be filled with water.
Water temperature should be no more than 20°C.
Sand content of the water (by mass) should be no more than 0.01%.
PH value of water 6.5-8.5.

304 stainless steel submersible Pump

304 Submersible Pump Application:

Irrigation, drip irrigation, lift irrigation
Industry: cooling tower, high pressure
Domestic: high rise building, long distance puming,fountain, water parks, washer etc.

QJ 304 Submersible Pump using condition:

380V voltage deviation is no more than ±5%,frequency is 50HZ, three -phase power deviation is no more than ±1%.
Motor cavity must be filled with water.
The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
The distance from the motor bottom to well bottom must be more than 3m.
Water temperature should be no more than 20°C.
Sand content of the water ( by mass) should be no more than 0.01%.
PH value of water 6.5-8.5.
Hydrogen sulfide content of the water should be no more than 1.5mg/L.
Chloride ion content of the water should be no more than 400mg/L.
Water yield of water source should ensure the requirements of pump continuous working.

WQG mine sewage pump

WQG mine sewage pump Introduction:

WQ sewage submersible pump is non-clogging sewage pump developed on the basis of the introduction of foreign advanced technology, now is the most advanced internal sewage systems. Features: notable energy saving effect, non-clogging , anti-winding, strong particles passing ability, automatic installation, automatic prosecution, etc.

WQ series submersible sewage pump is power irrigation equipment united by the motor and the pump, especially the swirling impeller and double-channel impeller matched with spiral type centrifugal pump body, which have extremely strong drainage capacity; The motor part adopts mechanical seals of hard corrosion double end face ceramic, which have very good effect of seepage prevention, its protection level is IP58 and designed insulation class is grade E (75 K), motor running more safe, reliable, and long service life, convenient installation.

WQ stainless steel submersible pump

WQ stainless steel submersible pump Introduction:

(1)Business unit waste water discharge
(2)Urban sewage treatment plant system
(3)The MTR ,basements,air -defence systems drainage station
(4)Hospital ,hotels ,high-rise building sewage Disposal
(5)Residential sewage pumping stations
(6)Municipal engineering ,construction sites dilute the slurry discharge
(7)Water supply water plant equipment
(8)Farm drainage and irrigation in rural areas
(9)Exploration ,mining and water-treatment equipment to manage replacement

WQS filled water submersible pump

WQS filled water submersible pump Introduction:

WQS series sewage pump is non-clogging sewage pump which is ssuccessfully developed basing on introducing advanced technology from abroad. It is the most advanced sewage disposal system equipment in domestic at present and featured with obvious energy saving effect, no plugging, winding preventing, strong solids passing capability, automatic installation and automatic detection etc.

WQS filled water submersible pump Applicable Scope:

(1). Business unit waster water discharge.
(2). Urban sewage treatment plant drainage system.
(3). The MTR, basements, air-defense systems drainage station.
(4). Hospital, hotel, high-rise buildings sewage disposal.
(5). Residential sewage pumping stations.
(6). Dilute slurry discharge in municipal engineerings and construction site.
(7). Water supply equipment in water plant .
(8). Farm sewage drainage and farm irrigation in rural areas.
(9). Exploration, mining and water-treatment equipment .
(10).Replace human labour to suck river mud.

WQK submersible sewage cutter pump

WQK submersible sewage cutter pump Introduction:

(1). Business unit waster water discharge.
(2). Urban sewage treatment plant drainage system.
(3). The MTR, basements, air-defense systems drainage station.
(4). Hospital, hotel, high-rise buildings sewage disposal.
(5). Residential sewage pumping stations.
(6). Dilute slurry discharge in municipal engineerings and construction site.
(7). Water supply equipment in water plant .
(8). Farm sewage drainage and farm irrigation in rural areas.
(9). Exploration, mining and water-treatment equipment .
(10).Replace human labour to suck river mud.

WQB series no-blocking sewage pump

WQB series no-blocking sewage pump Introduction:

WQB series sewage pumps adopt vortical and double flow impeller (highlift pump adopts centrifugal impeller) with a strong drainage capacity and the motor is sealed with hard anticorrosive ceramic of both single and double end faces besides,the motor is provided with builtin overload protection.

these pumps with a float switch which is suitable for permanent or semipermanent installations,say installations where it is necessary to maintain a water at a particular lever. as the water level rises, so will the float. at a certain point the switch will operate and start the pump. as the water level falls, so will the float until the switch operates again and stops the pump,its protection level is IP58 and designed insulation class is grade E (75 K), motor running more safe, reliable,and with longer working life.

WQ Sewage Pump

WQ Sewage Pump Introduction:

WQ sewage submersible pump is non-clogging sewage pump developed on the basis of the introduction of foreign advanced technology, now is the most advanced internal sewage systems. Features: notable energy saving effect, non-clogging , anti-winding, strong particles passing ability, automatic installation, automatic prosecution, etc.

WQ series submersible sewage pump is power irrigation equipment united by the motor and the pump, especially the swirling impeller and double-channel impeller matched with spiral type centrifugal pump body, which have extremely strong drainage capacity; The motor part adopts mechanical seals of hard corrosion double end face ceramic, which have very good effect of seepage prevention, its protection level is IP58 and designed insulation class is grade E (75 K), motor running more safe, reliable, and long service life, convenient installation.